St-08H19N10G2B (EI-898)

Der Schweissdraht kaltgezogener Stahl-Schweißen (Belag) und die Herstellung von Elektroden

Einstufung

Land Abschnitt Kategorie
GUS, Russland, Ukraine Materialien zum Schweißen und Löten Stahlschweißdraht

Chemische Zusammensetzung

Standard Fe, % Si, % Mn, % Cr, % Ni, % P, % C, % S, % Nb, % N, %
GOST 2246-70 64.85–69.05 0.2–0.45 1.8–2.2 18.5–20.5 9.5–10.5 < 0.03 0.05–0.1 < 0.02 0.9–1.3 < 0.05

Informationen zum Lieferanten

Properties

Property
Note Fluctuations in the tensile strength in one coil of wire with a diameter of more than 1.4 mm should not exceed 90 N / mm2.
For welding Diameter: 0.3 - 0.5 mm; Temporary resistance: 890 - 1390 MPa
Diameter: 0.8 - 1.5 mm; Temporary resistance: 890 - 1340 MPa
Diameter: 1.6mm; Temporary resistance: 890 - 1290 MPa
Diameter: 2mm; Temporary resistance: 790 - 1190 MPa
Diameter:> 2 mm; Temporary resistance: 690 - 1040 MPa
For the manufacture of electrodes Diameter: 1.6 mm; Temporary resistance: 690 - 990 MPa
Diameter: 2mm; Temporary resistance: 690 - 990 MPa
Diameter:> 2 mm; Temporary resistance: 640 - 940 MPa
Density: 7.82 g / cm3

Analoga

Deutschland USA
347 W34740

Standards

Beschreibung der chemischen Elemente

Element Maßeinheiten Beschreibung
Fe % Eisen
Si % Silizium
Mn % Mangan
Cr % Chrom
Ni % Nickel
P % Phosphor
C % Kohlenstoff
S % Schwefel
Nb % Niob
N % Stickstoff